Water intercooler heat exchanger
Here's the intercooler I used.
A little elbow grease, and the intercooler buffed and polished out nicely.
I used a B&M Heat Exchanger mounted up front for the water intercooler.
The fit was pretty tight, but everything squeezed in. Note the factory A/C up there as well.
All the hoses routed nicely on the passenger side of the van, similar to how the A/C houses are routed on the driver's side.
Since the radiator had to come out, I had it flushed and pressure tested as well.
The electric water pump I used was a Meziere WP136S.
|